Cost Of Wood For Roofing In Nigeria

When it comes to roofing a house in Nigeria knowing the cost of wood is important. If you have a plan it should be included in, if you don't have one, you should endeavor to get your plan in place.


Your plan should include the plan for the house detailing milestones, for example from January to this February I would have finished the foundation, from February to June I would have reached lintel for a ground house or reached decking for a story building house or duplex.


This helps you track your progress, check your budget and adjust where approximate, most importantly it helps you stay focused and on a lighter note avoid village people.


Let enter the market and see the prices of woods sellers in Timber markets are insisting on.

Sizes of roofing woods in Nigeria

Wood or timber are produced in different sizes for roofing, these sizes are listed below along with their measurement in inches and millimeters.

2” by 2” i.e 50mm by 50mm

2” by 3” i.e 50mm by 75mm

2” by 4” i.e 50mm by 100mm

2” by 6” i.e 50mm by 150mm

3” by 4” i.e 75mm by 100mm

3” by 6” i.e 75mm by 150mm

Cost of Wood For Roofing in Nigeria

There are two main types of wood in Nigeria, hardwood, and softwood.


You get hardwood from a deciduous tree which loses its leaves every year and softwood comes from a conifer, which is often evergreen, Hardwoods are slow growers and are dense.



For the prices it depends on the market, the prices are a combination of key timber markets in Nigeria, from the cities of Lagos, Aba, Port Harcourt, Benue, Kano, Sokoto representing Southwest, Southeast, Northcentral/middle belt, Northeast and Northwest respectively. It might not be exact as the priced are subject to change but we will be updating it.

Prices of Hardwoods for roofing in Nigeria

2×2 – N300 – N400
2×3 – N200 – N230
2×4 – N300 – N500
2×5 – N400 – N600
2×6 – N500 – N650
3×4 – N500 – N700

Prices of Softwood in Nigeria

2x 4 x 12 – N200 – N270
2 x 3 x 12 – N100 – N270
1x2x12 – N400 – N500

All prices are in Nigerian Naira.

When it comes to roofing a house in Nigeria knowing the cost of wood is important. If you have a plan it should be included in, if you do...

Minimum Cost Of Roofing A House In Nigeria

This is a rough estimate of how much in you can spend in roofing a house in Nigeria. Whether it's a bungalow or a duplex, whatever type of house, you'll get the guidelines for the rough estimate. You might spend slightly more or even less depending on some factors.


Yes, you can actually know the amount of money you need if you want to roof a house even without starting the project. You just need to take into consideration some factors and circumstances that are peculiar to Nigeria.

Factors like

Prices of roofing sheets

When it comes to prices of this roofing sheets, it can change the amount someone bought him 5 months ago may not be the same amount another person will buy his own.


For example, a long span aluminum roofing sheet may go for N1,250 per meter for 0.45mm on January and on Nov to December it might increase due to festivities.


For the current prices of roofing sheet in the market you can check it out, otherwise visit the nearest Timber market to find out prices for yourself, if you are not available we can gladly get you these prices in any state you want (see our services page)

Types of roofing sheet

There are many types of roofing sheet, from ordinary zinc to long span roofing sheet, they all have different prices, for instance, the price for aluminum roofing sheet is different from stone coated stipe tile, if you'll like to see the various types of roofing sheet in Nigeria and their pictures check this article.

Wood

You need to determine what type of wood will be best suitable for your roofing style, hardwood, single wood etc.

Carpenters/ labor cost

The third factor is the carpenters that will roof the house, they don't have a fixed price, a set can charge an amount while another can charge a different amount, so they are not fixed. (If you're in PH, IMO, Abia and Lagos and in need of good carpenters that specializes in roofing contact us to recommend really good ones.)


Those are the four major factors you need to consider, others are Minor.

What are the materials needed for roofing?

This is for roofing alone excluding the ceiling cladding, facial flashing, eave angle, valley gutter, angle ridge caps, wall trimmer or wall tape is which is usually 496 square meters for a large house.

We will take into account the dimensions,
These dimensions are essential to determine the accurate span of Rafter, Wallplate, Tie beam, King Post, Overhang, Purlins, fan struts, and others.

Now for a standard house, we have


Ceiling noggins of 600mm, and 600mm as overhangs on both sides you'll have 7,800mm or 7.8m +1200mm or 1-2m=9meters.


Then divide by 0.6m of 16.975m of 50 by 50 you'll have 15 PCs of wood.


- For the number of 2 by 2 wood to buy in the market for the ceiling noggins-

18.175m x 15pcs=273m of 2” by 2”

9m x 31pcs=279m of 2” by 2”

Total=552m

In the market, the wood comes in 3.6m per piece

So 552/3.6=153 pcs of 2” by 2” you will buy 153 pc of 2 by 2 wood for ceiling noggins.


- For wall plate 28pcs of 3” by 4”

- For facial board 15pcs of 1” by 12”

- For Tie beams 32pcs of 2 by 6 of wood

- For struts, 64 pcs of 3 by 4 or 75mm by 100mm

- For Rafters in our case the height of the roof as 3.5m and the breadth of plan plus overhang is 9m, so 24 pcs of 3” by 4” required for rafters.

- For Purlin which is wood of 2” by 2” or 50mm by 50mm we nail the roofing sheets on, 66 pieces of 2” by 2”

- Others are King post which is a piece of wood that stands at the middle of two rafters at the opposing sides.

For Kingpost 15 pieces of wood of 2″ by 6″ is needed, see the diagram for details

This is where wall plate, strut and rafter is located.

I'm I boring you with the technicalities? Here is a summary of what is needed For a 3 bedroom bungalow


1. 7 and a half bundles of Alo Zinc ( you can roof with other type of roofing sheet)

2. 16 pcs of facing board

3. 200 units of coconut tree plank.

4. One bag of 4 inches nail

5. A quarter of a bag of 3 inches nail.

6. Transporting the planks, roofing and facing board to the site.

7. Labor cost (that is if the prices are not bundled together by the carpenter, most carpenters buy the materials and execute the project)


Let's just come down to the amount of money you should budget if you want to roof your house.


Depending on the current prices of items in the market it shouldn't cost more than N500,000 for a standard house in Nigeria.


The recent project we did was for 420,000 for roofing a 4 bedroom Bungalow house with 0.45mm Longspan North brow roofing sheet in Aba Abia state.

This is a rough estimate of how much in you can spend in roofing a house in Nigeria. Whether it's a bungalow or a duplex, whatever ...

Types Of Roofing Sheets And Prices In Nigeria

While this roofing sheets are constant, that is you can always count on
its availability in the market, the price may from time to time change.

So this price mentioned here may change at any time, it is not constant.
You can contact me to get the latest prices for for  a token.

1. Stone Coated Step tile roofing sheets

0.45 thickness 2000 Naira grade B

0.55 thicknesses by D.s tile Korea batlan brand -N2500 for grade A

Shingle tile by D.s tile Korea batlan brand- N3000 grade A

0.45 shingle tiles- 3000 naira for grade A

Shake tile – 3500 Naira for grade B

Roman tile two colors- 4000 Naira for grade A

2. Aluminium Roofing Sheets (per square metre)

For 0.45mm Aluminium Roofing sheets- 2,000 Naira /sqm

For 0.55mm Aluminium Roofing sheets Longspan- 2,300 Naira / sqm

For Aluminium Step Tile Roofing Sheets

For 0.45 mm Aluminium Step Tile Roofing Sheets - 1500 Naira per square metre

for 0.55mm Aluminium Step Tile Roofing Sheets (longspan) - 2000 Naira /sqm

3. Fibre Britment Roofing Sheets.

Fibre britment roofing sheets cost 2,300 naira per square metre

Fibre britment step-tile roofing sheets f cost 3,500 naira per square metre.

Remember the cost is not fixed, it can change any time. So before you
embark on roofing, go to the market and find out the prices.

If you rather I do that for you, just contact me. I'll get you the quotes,
that is prices for the type of sheet and location you specify for a token. 
not forgetting others like 






4. Zincs

While this roofing sheets are constant, that is you can always count on its availability in the market, the price may from time to time chan...